Execution:
• Standard version with two prismatic measuring bases bottom horizontal and left hand vertical, and two flat measuring bases top horizontal and right hand vertical, contact faces hand scraped for sensitivity 0.05 mm/m and better, according to Standards DIN877 + DIN2276/1
• Various options are possible (see table below)
• Simple adjustment of the zero-point and of rollover errors (twist) of the main vial, due to an ingenious adjusting system
• Excellent view on the vial from above and from the side
• The main vial being fixed in a special mounting device, the vial is absolutely free from any tensions
• Transversal vial with a sensitivity of 2-5 mm/m for easier handling of the level when measuring on horizontal shafts or in the vertical
• The prismatic bases are suitable for shaft diameters Ø 17 … Ø 135 mm, depending on the dimensions / Details see table below
• Special plastic handles on 3 sides eliminate the transfer and influence of the body temperature
• Packed in a wooden storage case


Function:
• The FRAME SPIRIT LEVEL 58 SPIRIT is suitable for measurements on vertical and horizontal surfaces and shafts
• Optional magnetic inserts in the vertical measuring base assure an excellent adhesion to vertical shafts and surfaces


Dimensions:
100 x 100 x 32 mm Shaft Ø 17 ... 84 mm
150 x 150 x 35 mm Shaft Ø 17 ... 94 mm
200 x 200 x 40 mm Shaft Ø 19 ... 108 mm
250 x 250 x 45 mm Shaft Ø 19 ... 120 mm
300 x 300 x 50 mm Shaft Ø 22 ... 135 mm


Twist stability according to WYLER standard:
• Rollover stability ± 2 degrees


Calibration Certificate:
• The FRAME SPIRIT LEVEL 58 SPIRIT can be delivered with an internationally recognised Calibration Certificate against a surcharge